Blog posts tagged with 'brilliant'

Features of jewelry
Jewel is actually the same gold, but not only gold was used to make it. Rather, when making jewelry, the base and body of the jewelry are made of gold or silver, and then precious stones are used to make it more beautiful. In addition to precious stones, primary and atomic gems are also used to make jewelry.

The main gem is the natural diamond that is extracted from the depths of the earth. But the atomic gem is actually made artificially in laboratories. For this reason, jewelry made of precious stones or diamond gems is called original jewelry. But the jewels made of atomic gems are called atomic jewels.

jewel

In general, gemstones gain value for 3 reasons
beauty and brilliance, rarity and durability; Brilliant stone, which is a type of diamond, is higher than other stones in terms of brilliance and durability, and since good management has been done on it since the beginning of exploration, it has a good market supply and demand, but emerald and sapphire stones are rarer and the quality Above them, it has a great value and causes them to become more and more expensive, but it is beyond the ability of ordinary people to determine the quality of all stones. For example, you may buy a diamond ring that the seller charges a lot for the stone used on it, but when you sell it, you realize that the diamond used in the ring was of poor quality due to bad cutting, impurities, etc. and was not worth the money you paid. . To prevent this problem, the only way is to buy from jewelry stores that are authentic and guarantee the purchased item. Reputable jewelry stores only deduct 15-20% of the money you pay when selling, if you don't have a valid invoice, you may suffer a lot of loss when selling jewelry.

jewel

In general, in Iran, people can invest in silver in three different ways:

Buying and selling silver
The first method is buying and physically storing silver. You can buy silver in coins, bars or other metal pieces and hold it as an investment. In this method, silver is used as a tangible physical asset. Buying and selling silver is done by many sellers in physical and virtual form.

Buying silver in the Iranian stock market
The second method of investing in silver in Iran is to buy silver in the Iranian commodity exchange. Silver contracts are similar to other investment contracts and allow you to trade the stock market without owning physical silver.

Silver investment fund
A silver mutual fund is a type of investment that allows you to indirectly invest in the silver market. In this case, you buy your shares or investment units in the fund and your capital is used by the fund management to invest in the silver industry and market. This fund provides you access to the silver market without having to buy and store physical silver yourself.

Before investing in silver in Iran, adequate research and consultation with professional financial advisors is recommended. Because various factors such as price fluctuations, country's economy and international conditions also affect the process of investing in silver.

People and investors did not know what to invest their money in other than pure gold. But people have changed. So are investment patterns.


jewel
Are you planning to turn precious jewelry into an investment option?

If yes, then you can make diamonds a part of your investment portfolio. According to the activists of this industry, diamonds have good returns. Most importantly, investors have seen steady price increases in recent years. However, like any other investment, diamonds have their own pros and cons. As an investor, you should be aware of these things to get the most out of your investment. In this article, we will tell you everything you need to know before investing in diamond jewelry.

Advantages of buying diamond jewelry as an investment
Over the past few years, the use of diamond jewelry as an investment tool has grown rapidly. Several factors make them a good investment option compared to gold.

Size: The first and most obvious advantage that diamond jewelry has over gold is its size. Unlike gold bars, diamonds do not take up much space. These precious stones have long been used as an excellent means of transferring money. A piece of diamond, no matter how small, is worth two or three times as much as gold jewelry of the same size. This means that diamond jewelry, be it diamond rings or necklaces, are good investment options.

Storability: In small size diamonds, there is excellent storability. So much so that you can keep a diamond worth hundreds and thousands of dollars or several hundred million in a small safe. Also, diamond jewelry is an asset that can be seen, held and used. As a result, many people feel it is a safer bet than stocks and other digital investments.

Durability: Durability of diamonds is another advantage that is naturally given to them. Diamond is the hardest natural stone on earth! You can be sure that nothing will happen to it. As long as you take good care of your diamond jewelry, you don't have to worry about it getting lost. This means you can use, shine and enjoy your investment for as long as you want.

And if you're worried about losing it, you can insure it too. Like other physical commodities such as gold, silver and real estate, diamonds are anti-inflationary. However, unlike other physical commodities, diamond jewelry is a more volatile and durable investment. Aside from the physical and psychological aspects of diamond jewelry as an investment, they also have financial benefits.

If you want to know more about jewelry making tools, stay with us until the end of this article!
All your favorite ornaments and jewelry have been designed by a jeweler and after hours of effort on the raw materials, they have become your favorite work of art.
Designing jewelry and making them is so complicated and delicate that some call it as a manual art.

To make the simplest rings and earrings, jewelers need hours to carefully and elegantly draw designs on the metal or stones that are to be
Place a gem on them, implement it.
Although the progress of the industry and the introduction of new technologies have made parts of the process of making jewelry and ornaments easier, but still complex handmade designs have a higher price and value.

brilliant

The more complex the final design is, the designer is obliged to spend more time and precision on it, and of course the cost of making and paying gold will also increase.
Jewelers use their special tools in this process. These tools have been expanded and advanced over time and according to human needs and interest in jewelry with complex designs.
While the first humans tried to create "artistic" designs with stones and wood on the bones of the animals they hunted for food, today jewelers use magnifying glasses, different narrow tails or Even advanced 3D printer technologies are trying to produce exquisite jewelry.
In this article, we will review various gold and jewelry making tools that are actually needed to make jewelry. Tools needed to make jewelry

In this section, we will examine some of the most common gold and jewelry making tools that are needed for designing and making jewelry.
It is obvious that goldsmiths may need more advanced equipment to produce their designs, depending on their level of service and the amount of orders they receive.
In this article, we will introduce those tools that are used to produce jewelry, even at home.

brilliant

Narrow tail

One of the common tools for making ornaments is the narrow tail.
The narrow tail is used in various sizes and types for jewelry making. The narrow tail with a flat tip is used as a key tool for opening spring-shaped rings or polishing the edge of the ends of wires.


Narrow tail with a flat tip

Usually, goldsmiths need more than one narrow tail with a flat tip in their work, and that is why you can easily get this tool in different sizes from the market. With the help of this tool, you can make the wire smooth. Make sure to remove any bends or unevenness from it.
You can also use the thin tail to hold the gold pieces without causing serious damage to their surface.


Narrow tail with rounded tip

Another type of tails that can help you a lot while making jewelry is round tip tails. From this tool to make rings
(such as hoop earrings or rings) are used.
This tool has two jaws that are placed next to each other in a conical shape. You can produce rings of different sizes by wrapping the wire around these jaws.
To make rings with a large diameter, you should wrap the wire in the lower part of the cone near the handles. To make smaller rings, you can use the diameter of the cone near the tip of the tool.
You can also use a narrow tail with a round tip to hold the rings and polish them.


Slim tail with leather cover

Another type of narrow tail which is very useful in making jewelry is the narrow tail with leather cover. Usually, this tool is used to tighten the connections at the end of the work. By using this tool, you can fasten the wires. twist or make them into a ring shape. Many use a narrow tail with a leather cover to create waves and bends on the surface of the wire.
You can use one or both edges of the tool according to your design and taste.

Brilliant latch

Four-pronged diamond clasp for precious stones; The safest way to hold a gemstone is for examination or display.
The holder has four branches and a tissue cover; which ensures a secure adhesion.
Press the plunger and place each stone in the steel jaws of this holder. The jaws are spring-loaded and self-retracting to hold the gemstone gently but firmly.

brilliant

Expenditure

Making ornaments from precious stones and precious metals is an artistic combination of human structures. Do you know how fine jewelry is mounted on metals? The connection of these parts is done during the working operation. Mukhrajkari is one of the most important specialties in making gold and jewelry. By combining precious stones and precious metals, the jeweler displays the pinnacle of art and creativity. The jewelry making process starts with the selection of the jewelry and ends with the work.
What is an expropriation?

Makhraj Kari is one of the stages of making ornamental jewelry. In the process of making jewelry, it is necessary to attach precious stones to precious metals. Jewelry and metal are not connected with glue or similar materials, but the jewelry artist puts the precious gem into the rare metal. In fact, placing the stone in a specially designed foundation is called mahraj kari.

Inlaying or inlaying is the final stage and the most sensitive part in jewelry design. After the work base is prepared and the jewel is beautifully cut, it is time to mount the stone on the ready base. This work requires high precision and expertise. Various methods are used to carry out excavation work and mount the stone.

Methods of mounting small stones:

      Pen holder
     grip
     Railroad
     Bowl

Methods of mounting large stones:

     wall face
     grip
     corner

  Types of foundations in the work

All the beauty of the work depends on how the jewel is mounted on the base. Due to the fact that the bases of the work are not the same, different methods are used to connect these two pieces. Normally, precious stones such as emerald, opal, turquoise, ruby, brilliant, diamond, etc. are used in making jewelry. In the process of making jewelry made with artificial stones, casting is also used. Due to the variety of support bases, different methods are used to mount jewelry on metal.

Some of the most common retainer bases are:

     prong
     channel foot
     Paving base
     Wall or cavity base (Bezel)
     Ballerina base
     cluster base
     Bead base
     flush base

The price of diamonds and other precious stones is determined by the four main characteristics of weight, color, clarity and cut. Which is briefly explained below how to price brilliant:


Weight :
Carat is the unit of measurement for the weight of diamonds and other types of precious stones. Every five carats is equal to one gram. The price of a diamond increases exponentially based on its weight, for example, the price of a two-carat diamond of one type is about four times the price of a one-carat diamond of the same type. If, depending on other characteristics, the same difference can be even ten times higher.
Another important point about the weight of the diamond that should be noted is that the 0.99 carat diamond compared to the 1 carat, although they have a very slight weight difference, but their price difference can be up to 50%. This price difference includes 1.99 and 2 carats and other weights as well.


Color :
In the above list and commonly used stones, the more colorless the diamond, the better. The Latin letters D to O are used to specify the color of diamonds, where D indicates a nearly colorless stone. The difference in the price of color D with a category lower than it, namely E, is more than the price difference of other colors with their neighboring colors. Usually, the color seen in low grades is yellow or brown.
Some special diamond colors such as pink or blue generally have much higher prices due to their rarity.


Transparency:
Brilliant clarity is measured in degrees from I3 to FL. FL means a stone without any transparency problem and it is very rare. The transparency of the stone is affected by the presence of impurities or cracks or any other problems inside the stone, as well as surface problems of the stone, which has a significant effect on the price of the stone. The transparency of the stone cannot be measured exactly by eye. Stone problems up to class VS i.e. FL, IF, VVS1, VVS2 cannot be detected with the naked eye. If a problem can be seen with the eye, generally the stone is placed in SI2 categories and below.


Cut:
The type of stone cut and the quality of the cut have a significant effect on the price of the stone. Another thing that is included in this section is the dimensional ratio of the stone. For example, a stone with a high profile is much more expensive than a stone with the same characteristics but a low profile. It is not possible to evaluate stone cutting in high grades with the naked eye.
So far, we have realized that the diagnosis of diamond price must be checked by an expert.

The next part is the price of gold and the cost of making the jewelry base, which takes a significant amount compared to polished gold due to the sensitivity of the type of base in the production of components.

The next issue that maybe few people pay attention to is auctioning jewelry

Auctioneering is a completely manual profession and is included in handicrafts

Many people in Iran are engaged in this profession and install diamonds and other precious stones by hand and other tools on jewelry bases.

The next step is plating

At this stage, the jewelry enters the radium water solution and absorbs a layer of radium on the surface of the gold by two positive and negative poles.

According to the law of the Union of Jewelry and Jewelry, the profit of the seller is 20% of the total amount of all the above items